Tech Info - Motorola 7500

Eng Field Options

Active Cell

RxLev -55 	        Received powerlevel in dBm
NCC 0 		National Colour Code, used for identifying channel
BCC 7 		Broadcast Colour Code, also for identifying purposes
MSTxPwr 35	Max allowed transmit power 35dBm about 3.2W
C1 003		Is a calculated figure for the quality control signal which is constantly sent out from the RBS quality the signal 
			returning from the phone has. If this value is negative for more than 5 sec then the system will make a cell switch.
Time Adv xxx	xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters. 

Adjacent Cells

Adj Cell 1
Channel 0033 	Channel Number
RxLev -65	Received powerlevel in dBm
BCCH Decode 	I think it means it is able to decode the channel information contained in the BCCH
RxLevAM -104	Min allowed reception, compare with RxLev -65 and you get the C1 value which is 39 and reported back to base as
measure of field strength.
MTxPwr 35 	Aain max allowed powerlevel
C1 003 		??
NCC 0 		National Colour Code
BCC 6		Broadcast Colour Code 

System Parameters

Combined Off 	??
AcsClas 0000 	Allows different priorities - this network doesn't support it.
MCC 505 	Mobile Country Code, 505 for Australia, 240 for Swedes etc
MNC 01		Mobile Network Code, 01 for Mobilenet, 02 for Optus, 03 for Vodafone using MCC 505. MCC+MNC is often called Network Code 
LAC 08720	Location Area Code, shows which exchange your're in
CellID 00473	Base Station Identity
T3212 005	Time between periodic network updates (either hours between or time remaing until update, not sure)
BS-PA-MFRM 4	??
XZQTY 14.3	??

ANT- (O) | | | | | | | | | |
        10 9 8 7 6 5 4 3 2 1
        Top of phone (screen)

1) Audio Ground
2) Ext b+
3) T Data
4) C Data
5) R Data
6) Logic Ground
7) Audio Out - on/off
8) Audio In
9) Manual Test
10) Battery Feedback